Ethernet Port - Xerox WorkCentre 7132 System Administration Manual

2.
Enter the correct user ID using
the numeric keypad on the
control panel or the screen
keyboard.
NOTE: The default Key Operator ID is "11111". If the Authentication feature is
enabled, you may be also required to enter a password. The default password is "x-
admin". To change the default user ID or password, refer to System Administrator
Settings in the Setups chapter of the User Guide.
3.
Select [System Settings].
4.
Select [System Settings].
5.
Select the required option and
customize to meet your needs.
6.
Select [Save].
NOTE: The appearance of the touch screens may differ slightly depending on the
model and configuration. However, feature descriptions and functionality described
here remain the same.

Ethernet Port

The Ethernet port is the default interface used on the machine.
If you need to change the speed setting of the Ethernet port, perform the following
steps:
1.
Select [System Settings] on the
[System Administration Menu]
screen.
NOTE: For more information on how
to display the [System Settings]
screen, refer to Changing the
Settings on page 34.
Xerox WorkCentre 7132 System Administration Guide
System Settings
35