Xerox WorkCentre 7132 System Administration Manual page 78

6 UNIX TCP/IP
SunOS
Follow the steps below to set up a SunOS workstation to communicate with the
machine.
1.
Log in at a client workstation as root and add the machine to the /etc/hosts file.
For example:
NOTE: If an NIS server is running on the same segment of the network as the
machine, Log in at the NIS server as root and add the machine to the master hosts
file. For example:
2.
Verify connectivity to the machine, by using a UNIX command such as ping, as
shown in the following example:
3.
Edit the /etc/printcap file to contain an entry for the machine queue using the
following example:
1) PrinterName is the local client name of the machine.
2) lp= is the local device name for the printer output. For remote printers, this
NOTE: The recommended remote queue name is lp. That queue name will work with
the machine.
3) rm= is the remote device. This is the IP hostname for the machine in the local
4) mx#0 is the indicator that there is no limit on the document size.
5) sd= is the path of the queue for the machine.
6) lf= is the error log file name.
78
IP address [tab] PrinterName
IP address [tab] PrinterName
ping PrinterName
PrinterName is alive
PrinterName:\
:lp=:\
:rm=PrinterName:\
:mx#0:\
:sd=/var/spool/lpd/PrinterName:\
:lf=/var/spool/lpd/PrinterName/log:
parameter must be set to nothing.
client. The remote printer name defaults to lp, the default printer.
Xerox WorkCentre 7132 System Administration Guide