Xerox WorkCentre 7132 System Administration Manual page 61

SMTP
Server Settings:
• Server Address – Enter the SMTP server address. Up to 128 characters can be
• Port Number – Specify the SMTP port number.
• Send Authentication – Select whether and how users are required to
• User Name – Specify the user ID for SMTP authentication.
• Password – Specify the password for SMTP authentication.
Outgoing Mail Settings:
• Maximum E-mail Size – Allows you to specify the maximum e-mail size.
• Max. No. of Pages for Split Send – Allows you to set the size of outgoing e-mail
POP3
Server Settings:
• Server Address – Enter the POP3 server address. Up to 128 characters can be
• Port Number – Specify the POP3 port number.
• POP Receive Authentication – Select to enable APOP authentication.
• User Name – Enter the POP user address.
• Password – Enter the POP user password.
Incoming Mail Settings:
• POP3 Server Check Interval – Enter the interval to check the POP3 server
5.
Select [Apply] to reflect the new setting.
6.
Enter the user ID and password then select [OK].
NOTE: The default user ID is "11111" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot Machine].
NOTE: For more information about the contents of items, refer to the CentreWare
Internet Services chapter of the User Guide.
Xerox WorkCentre 7132 System Administration Guide
Using CentreWare Internet Services to Configure Settings on the Machine
entered, including . (period) and - (hyphen).
authenticate before sending e-mail using an SMTP server.
in pages.
entered, including periods (.) and hyphens (-).
between 1 and 120 minutes in 1 minute increments.
61