1.
Select [Secure Print] on the
[Stored Documents] screen.
2.
Select a User ID. Use the scroll
buttons to switch between
screens.
3.
Select [Document List].
4.
Enter the password and select [Confirm].
5.
Select a document to print or delete.
6.
Select the required option.
• Refresh – Refreshes the displayed information.
• Go to – Specifies the Secure Print number to be displayed on the screen. Enter a
number within the range of 001 to 200 using the scroll buttons or the numeric
keypad.
• Document List – Displays the password input screen for the selected user ID in the
list. Enter the password to display the list of stored documents. The following options
are available:
– Select All – Selects all documents in the list.
– Delete – Deletes a document.
– Print – Prints a document selected in the list. Select whether or not to delete the
NOTE: If you have forgotten the password, contact the Key Operator. The Key
Operator can access the stored documents without entering the password.
Sample Print
This feature allows you to print a sample set of a document prior to printing the whole
quantity. You can choose whether or not to print more sets after checking the print
result.
1.
Select [Sample Print] on the
[Stored Documents] screen.
2.
Select a User ID. Use the scroll
buttons to switch between
screens.
3.
Select [Document List].
4.
Select a document to print or delete.
5.
Select the required option.
• Refresh – Refreshes the displayed information.
• Go to – Specifies the Sample Print number to be displayed on the screen. Enter a
number within the range of 001 to 200 using the scroll buttons or the numeric
keypad.
Xerox WorkCentre 7132 System Administration Guide
stored documents after printing.
Modes
23