Procedure For Scan To Smb Setup - Xerox WorkCentre 7132 System Administration Manual

13 Scanning Services
Data to Set Up Scan to SMB
SMB Login/password information
Kerberos IP Address

Procedure for Scan to SMB Setup

1.
On the control panel, select [Scan to SMB].
2.
Enter all the information required. See the User Guide for more detailed
information.
3.
Load sample document into the document feeder.
4.
Press the <Start> button on the machine.
5.
Logon to the SMB server. Navigate to the directory path (repository) that was set
up earlier on the server. Your scanned document can be found in the specified
directory.
NOTE: If Kerberos authentication (remote authentication) has been enabled, a
separate login screen appears when the Scan to SMB feature is selected. Documents
are not scanned in unless the Kerberos server authenticates user access.
136
Install
Requirement
Optional
Optional
Xerox WorkCentre 7132 System Administration Guide
Comments
This is required, if the SMB server requires
login/password authentication. Most SMB
servers require a login/password.
If Remote Authentication is required, then
Kerberos needs to be enabled.