Xerox WorkCentre 7132 System Administration Manual page 147

the machine is subsequently turned on, and the print data is printed on the machine
in turn.
When printing
• When [Receiving Buffer - SMB Spool] is set to [Hard Disk] or [Memory]:
Print data cannot be received if the print data size exceeds the available capacity of
the hard disk or memory allocation.
NOTE: If the print data exceeds the receiving buffer capacity, the client may retransmit
the same print data. In this case, stop the client and make sure that the client does not
transmit the print data.
• When [Receiving Buffer - SMB Spool] is set to [Off]:
Print requests cannot be received from a client if a print request from another client
is being processed.
• When the client IP address or computer name is changed:
When the client IP address or computer name is changed, the machine cannot
perform query processing and cancel processing. Turn the machine off and on with
the receiving buffer empty of print data.
NOTE: Stopping printing or forced deleting of print data in the machine receiving
buffer can be performed using the control panel. For information, refer to the Job
Status chapter of the User Guide.
• When the machine is offline:
If a client issues a print request when the machine is offline, the print data cannot be
received, and a write error is generated and displayed in an error dialog box on the
client.
• Deleting jobs:
On Windows NT 4.0, jobs can be deleted if Service Pack 4 or later is installed.
Deleting a job while receiving print data generates a write error. In this case, the
button to retry printing on the error dialog box is disabled.
Printing using an SMB environment
• On Windows NT 4.0, Windows 2000, and Windows XP, printing in an SMB
environment is not available when Unicode support is active.
• On Windows XP, the user name may not be correctly displayed when printing on an
SMB port.
Authentication using SMB
When SMB authentication is performed using the assigned IP address or host name,
authentication is successful if only the user name and password matches the
authentication server, even if the domain name does not match.
Xerox WorkCentre 7132 System Administration Guide
SMB
147