Comments In The Ascii List File - Beckhoff TF5200 Manual

General description
1.4

Comments in the ASCII list file

Comments can be in an entire line or can be added at the end of a line.
With a comment spanning an entire line, the comment character "'#" must be placed at the start of the line
and followed by a blank.
If a comment is to be inserted at the end of a line, only a blank is required before the comment. However, if a
string was defined in the line, the comment must be preceded by the comment character "(".
Blank lines are also possible.
Comments in the ASCII list file
# ************************************************************************
# Data
# ************************************************************************
#
# Listing
dummy[1] 1 Comment
dummy[2] 1 # Comment
dummy[3] 1 ( Comment
dummy[4] 1 /* Comment
...
...
beispiel[0].bezeichnung STRING_2 (Comment: comment brackets required here!)
12 Version: 1.22 TF5200 | TwinCAT 3 CNC
Axis compensation