Last Index Of Master Axis 1 (P-Comp-00010); Last Index Of Master Axis 2 (P-Comp-00011); Start Position Of Master Axis 1 (P-Comp-00012) - Beckhoff TF5200 Manual

General compensation value data (kw.*)
Dimension T: 0.1 µm or increments
Default value 0
Remarks
3.2.6

Last index of master axis 1 (P-COMP-00010)

P-COMP-00010 Last index of master axis 1
Description This parameter determines the last valid index in the table of master axis 1
(maximum value is 100). The table always starts with index 0.
Parameter kw.crosscomp2.last_index_master1
Data type SGN32
Data range 0 ≤ P-COMP-00010 <= 100
Axis types T, R, S
Dimension T: ----
Default value 0
Remarks As of Build V3.1.3079.06, P-COMP-00010 is freely assignable. There is no upper
limit. However, the condition of P-COMP-00061 [} 18] must be complied with.
P-COMP-00010 * P-COMP-00011 [} 20] <= P-COMP-00061 [} 18]
3.2.7

Last index of master axis 2 (P-COMP-00011)

P-COMP-00011 Last index of master axis 2
Description This parameter determines the last valid index in the table of the two master axes
(maximum 100 values). The table always starts with index 0.
Parameter kw.crosscomp2.last_index_master2
Data type SGN32
Data range 0 ≤ P-COMP-00011 <= 100
Axis types T, R, S
Dimension T: ----
Default value 0
Remarks As of Build V3.1.3079.06, P-COMP-00011 is freely assignable. There is no upper
limit. However, the condition of P-COMP-00061 [} 18] must be complied with.
P-COMP-00010 [} 20] * P-COMP-00011 <= P-COMP-00061 [} 18]
3.2.8

Start position of master axis 1 (P-COMP-00012)

P-COMP-00012 Start position of master axis 1
Description This parameter determines the start position of master axis 1 in the compensation
table.
Parameter kw.crosscomp2.start_position_master1
Data type SGN32
Data range MIN(SGN32) ≤ start_position_master1 < MAX(SGN32)
Axis types T, R, S
Dimension T: 0.1 µm or increments
Default value 0
Remarks
20
R,S: 0.0001° or increments
R,S: ----
R,S: ----
R,S: 0.0001° or increments
Version: 1.22 TF5200 | TwinCAT 3 CNC
Axis compensation