Install Battery Door; Maintenance (Applicable Only To Kit 3 Lock Certified En 179 With Bmh 801 Lock Case) - Kaba Confidant RFID Kit 2 Installation Manual

12- INSTALL BATTERY DOOR

A
*
WARNING
C
*
Warning: For security reasons, lock must be programmed BEFORE installing the battery door. Every time the battery door is removed pass an emergency card or connect lock to Kaba
handheld programming device to reset the tamper alarm. Audit information is not affected.
13- Maintenance
Refer to the following:
- Installation and maintenace manual for BMH-panic door locks
- Instructions for the use of BMH locks and hinges
Confidant RFID Kit 2 & Kit 3 Installation Guide - PK3649_T_04_16
(applicable only to Kit 3 lock certified EN 179 with BMH 801 lock case)
B
D
17