Table of Contents
Advertisement
2.4.8.2
Exceptions
Click [Main menu Advanced Event] to enter into the <Event> interface shown as below
Event Type: support the three abnormal types: Disk No Space, Disk Error and Video Loss.
•
Enable Exception: allow you activate abnormal alarm.
•
Alarm out: allow you connect external alarm sensor. Select [Enable] or [Disable].
•
Alarm Out Time: you can set how long the external sensor alarm will last when the exception is detected (10sec,
•
20sec, 40sec, and 60sec);
Show icons: You can set show the icon on the screen when the exception is detected. About icons type please refer
•
to Section 4.
Buzzer time: you can set how long the buzzer will sound when the exception is detected (OFF, 10sec, 20sec, 40sec,
•
60sec);
Send Email: Allows you set the alarm images is issued to a specified email.
•
Event Type
HDD Loss
When Hard Drive is not detected (HDD damage, power supply malfunction), or HDD auto-overwrite
/ HDD No Space
is off, and free space is not enough, an alarm will be triggered.
Sends alarm when DVR can't receive video signal (such as camera damage, cable broken or
Video Loss
damaged or power supply malfunction).
2.4.8.3
FTP
This function is applied together with alarming function. The captured images or alarming recording can be uploaded to
FTP server through network.
FTP: Enable or disable the function.
Server IP: Put the FTP Server Address.
Port: FTP service port，default value is 21.
Nome Utente: User name for visiting FTP
Password: Password for visiting FTP
Nome Dir: Directory Name in order to transfer the pictures or record alarms.
DS1093-162A
Function
39
Advertisement
Table of Contents
