Ftp Schedule - urmet domus 5M-Lite HVR Series User Manual/Instructions

FTP Enable: select the required option to enable or disable operation.
•
Server IP: enter the address of the FTP server name.
•
Port: FTP service port. Default value: 21.
•
Username: user name to access the FTP.
•
Password: password for accessing the FTP server.
•
Picture Resolution: it is possible to set the resolution of sent pictures to FTP Server.
•
Picture Quality: It is possible to set the quality level for sent pictures to FTP Server.
•
Video Stream Type: select the Stream Type (i.e. Main Stream, Sub Stream) for sent video to FTP Server.
•
Max Package Interval: select the interval for how much time the pictures/video must be sent to FTP Server.
•
Directory Name: name of the folder in which to transfer the recorded images or motion alarms.
•
Upload Normal Video: Enable or Disable the option in order to send the Normal Video Recording to FTP Server.
•
Upload Alarm Video: Set the FTP Video/Picture Notification for event occurs (i.e. Motion, IO, PIR, Intelligent).
•
TEST FTP: click on the FTP TEST button to check operation of the configuration.
•
3.8.4.2

FTP Schedule

This configuration page can be used, as seen in the other cases, to select on which times and days of the week the HVR
must send an event to FTP in case of a given event.
Channel: this is used to select the channel to be configured.
•
Normal: use this option to define the times at which to enable for sending video/picture in case of Normal Recording.
•
Motion: use this option to define the times at which to enable for sending video/picture to FTP Server in case of
•
automatic motion detection.
IO: use this option to define the times at which to enable for sending video/picture to FTP Server in case of sensor
•
alarm detection.
PIR: use this option to define the times at which to enable for sending video/picture to FTP Server in case of
•
automatic PIR detection.
In-Analisys: use this option to define the times at which to enable for sending video/picture to FTP Server in case of
•
intelligent video analysis detection.
Default: Restore the Schedule default settings.
•
Copy: this is used to copy the current channel settings on another or on all other channels.
•
DS1097-010 63