Wireless Channel; Video Cover Settings (Private Zone); Motion Detection - urmet domus NVR H264 User Manual

Nvr wifi kit double antenna

Table of Contents

Switch: Choose OFF to unbind the NVR and the camera.

Mode: The mode that camera communicates with NVR.

AP --- The camera connects to the NVR's own routing WiFi, through which the camera communicates with the NVR.

STA --- The connection between the camera and the NVR is through the same LAN router network communication.

4.2.1.2

Wireless Channel

Region: NA/UK/MKK depends on the region.

Wireless Mode: Auto and Manual can be selected.

Wireless Chn: Wireless channel. It can be set up only when Manual Wireless Mode is selected.

4.2.2

This menu allows you to create privacy zone(s) if you want to partially cover some certain part of the image. You can

create up to 4 privacy zones in any size and location on the camera image. Enable the Privacy Zone, and choose how

many private zones you need. The private zone will display as a red frame. Click the edge of the red frame and drag it to

any size to create a private zone.

Enable Private Zone: Enable or close private zone. If you enable it, the private zone can be covered, and it will not be

displayed in live view.

Area: Four private zones can be set up at most in the area map. The four areas can be moved, stretched, and click apply

to save.

Note: The area of privacy zones you had set will be invisible in both live view & recording video.

4.2.3

This menu allows you to configure motion parameters. When motion has been detected by one or more cameras, your

WIRELESS NVR will alert you to a potential threat at your home. It does this by sending you an email alert with an

attached image from the camera to use as a reference (if this option is enabled) and sending push notifications via the

mobile app.

DS1098-047

Table of Contents

Nvr h265+