Sound Detection - urmet domus 5M-Lite HVR Series User Manual/Instructions

3.5.8.7

Sound Detection

This function allows to detect the sound if this function is available in Camera.
Click into the intelligent setup page, Then Click
Channel: To select the channel you want to configure
•
Switch: To enable or disable the Sound Detection function
•
Rise: To enable or disable the Rise function of Sound Detection
•
Rise Sensitivity: To setup the Rise Sensitivity within 0~100, default is 50
•
Sound intensity: To setup the Sound Intensity within 0~100, default is 50
•
Decline: To enable or disable the Decline function of Sound Detection.
•
Decline Sensitivity: To setup the Decline Sensitivity within 0~100, default is 50.
•
Notice:
In order to use this function, the Camera must have the Sound Detection function.
DS1097-010
into the Sound Detection setup page:
44