Table of Contents
Advertisement
2.5
MENU LOCK
Considering a system safety feature you can click [
to login to the DVR again, you would input device code and password to unlock the interface shown as below.
Friendly Reminder: Administrator has full authority over Main Menu operations and has an authority to limit common
user's operation.
2.6
SPLIT MODE
The model displays 4/8 live images in the sequence of single, 4-split and 9-split modes.
If you enter into 4-split mode, the live images will be displayed in turn CH1~4, CH5~8...and CH13~16.
If you enter into 9-split mode, the live images will be displayed in turn CH1~9 CH10~16.
2.7
PTZ CONTROL
We introduced setting PTZ parameters previously in section 2.4.6.2 – PTZ Set. Here we will discuss how to operate PTZ
controls.
Click the [
] icon to enter into [PTZ control] menu shown as above. Now user can control the camera with Pan, Tilt and
Zoom capabilities.
Click [Zoom-/+] button to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris -/+] button adjust
iris to open or close.
2.7.1
CRUISE SET
Open auto cruise function on PTZ setting menu if you want to setup cruise function (system default: off), and set up cruise
channel, cur point and total quantity and stop time etc
How to set pre-set point
Total: set up pre-set point quantity
•
Cur Point: indicates starting point cruised. System default point is 01. The model support up to 255 pre-set points.
•
Stop time: sets the stop time at each point
•
GOTO: allow you go to a specific preset point.
•
Set: allow you set a set of specific preset points of a PTZ camera.
•
1.
Select a camera you desire to set a preset point;
2.
Adjust the camera in a desired direction;
3.
Click [Set] to set the point as preset point;
4.
Click [Save] to save the preset point;
5.
Follow the above step to add one more preset point.
Save: save all the preset points
•
Clean: allow you delete one selected preset point.
•
Note: Up to 254 pre-sets per one camera can be stored. However, actual preset quantity differs depending on PTZ
performance.
DS1093-162A
] icon to lock system interface when leaving the DVR. If you want
40
Advertisement
Table of Contents
