Nexcom Neu-X102 User Manual page 50

Chapter 4: BIOS Setup
CPU Configuration
This section is used to configure the CPU.
Efficient the E-core Information
Enter the sub-menu of Efficient the E-core Information.
Intel® (VMX) Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
PECI
Enable or Disable PECI (Platform Environment Control Interface).
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
AVX
Enable or disable the AVX 2 instructions. This is applicable for Performance-
core only.
Active Efficient-Cores
This is allows you to select the number of E-cores to enable in each processor
package. NOTE: Number of P-Cores and E-Cores are looked at together.
When both are {0,0}, Pcode will enable all cores.
BIST
Enable or disable BIST (Built-in Self Test) on reset.
AP Threads Idle Manner
AP Threads Idle Manner for waiting signal to run.
AES
Enable or Disable AES (Advanced Encryption Standard).
MachnineCheck
Enable or disable Machine Check.
MonitorMwait
Enable or disable MonitorMwait; If disable MonitorMwait, the AP threads
Idle Manner should not set in MWAIT Loop.
36
Neu-X102 User Manual