Nexcom Neu-X102 User Manual page 56

Chapter 4: BIOS Setup
Network Stack Configuration
This section is used to configure the network stack settings.
Network Stack
Enable or disable UEFI network stack.
Ipv4 PXE Support
Enable or disable IPv4 PXE support. If disabled, the IPv4 boot option will
not be created.
Ipv4 HTTP Support
Enable or disable Ipv4 HTTP support. If disabled, the IPv4 HTTP boot option
will not be available.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Ipv6 PXE Support
Enable or disable IPv6 PXE support. If disabled, the IPv6 PXE boot option will
not be available.
Ipv6 HTTP Support
Enable or disable Ipv6 HTTP support. If disabled, the IPv6 HTTP boot option
will not be available.
PXE boot wait time
Configure the wait time to press the ESC key to abort the PXE boot.
Use either+/- or numeric keys to set the value.
Media detect count
Configure the number of times the media will be checked. Use either+/- or
numeric keys to set the value.
42
Neu-X102 User Manual