Save & Exit - Nexcom Neu-X102 User Manual

Chapter 4: BIOS Setup
Save & Exit
Save Changes and Exit
After save all the changes, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting "Yes" and then exit the system
setup.
Discard Changes and Exit
To exit the Setup utility and reboot the system without saving the changes,
select this field then press <Enter>. You may be prompted to confirm again
before exiting.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>.
A dialog box will appear.
Boot Override
To bypass the boot sequence from the Boot Option List and boot from a
particular device, select the desired device and press <Enter>.
46
Neu-X102 User Manual