Table of Contents
Advertisement
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to malfunction.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
USB Power State in S5
Select USB Power State in S5. The default is OFF.
eDP/LVDS Power State
Select eDP/LVDS Power controller state. The default is OFF.
State After Power Loss
Configure the power state when power is re-applied after a power failure
(G3 state).
Wake on LAN/COM
Enable or Disable the integrate LAN & COM port RI to wake the system.
35
Neu-X102 User Manual
Advertisement
Table of Contents
