NEXCOM International Co., Ltd. IoT Automation Solutions Business Group Fan-less Computer NISE 300 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published May 2017...
Acknowledgements The product(s) described in this manual complies with all applicable NISE 300 is a trademark of NEXCOM International Co., Ltd. All other product European Union (CE) directives if it has a CE marking. For computer systems names mentioned herein are registered trademarks of their respective to remain CE compliant, only CE-compliant parts may be used.
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products.
(manuals, cable, etc.) and any components from the card, such as CPU and RAM. If the components were suspected as part of the problems, ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer please note clearly which components are included. Otherwise, NEXCOM without any charge.
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2.
Preface Package Contents Before continuing, verify that the NISE 300 package that you received is complete. Your package should have all the items listed in the following table. Item Part Number Name Description 4NCPF00204X00 Terminal Blocks 2P Phoenix Contact:1777989 5.08mm Female DIP Green...
Chapter 2: Jumpers and Connectors Locations of the Jumpers and Connectors for NISB 300 The figures below are the top and bottom views of the NISB 300 main board used in NISE 300. It shows the locations of the jumpers and connectors. Top View...
Chapter 4: BIOS Setup Chapter 4: BIOS Setup This chapter describes how to use the BIOS setup program for the NISE 300. The The settings made in the setup program affect how the computer performs. BIOS screens provided in this chapter are for reference only and may change if It is important, therefore, first to try to understand all the setup options, and the BIOS is updated in the future.
Appendix C: GPI/O Programming Guide GPI/O (General Purpose Input/Output) pins are provided for custom system design. This appendix provides definitions and its default setting for the ten GPI/O pins in the NISE 300. The pin definition is shown in the following table: PowerOn PowerOn...
Need help?
Do you have a question about the NISE 300 and is the answer not in the manual?
Questions and answers