Advanced - Nexcom NDiS B338 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup - AMI
Main Advanced Security Boot
ATX mode
[S0 State]
State After G3
[Enabled]
Wake on LAN Enable
[OFF]
USB Power State inS5
CPU Configuration
SATA Configuration
Trusted Computing
ACPI Settings
NCT61260D Super IO Configuration
Hardware Monitor
S5 RTC Wake Settings
USB Configuration
Network Stack Configuration
NVMe Configuration
Version 2.22.1282. Copyright (C) 2022 AMI
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Specify what state to go to
when power is re-applied after
a power failure (G3 state)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
Wake on LAN Enable
Enables or disables the integrated LAN to wake the system.
USB Power State in S5
Configures the USB power state in S5.
36
NDiS B338 User Manual