Storing The System - ABB ProKiln GAC400 Operating Instruction

ProKiln GAC400 PROBE GAS SAMPLING SYSTEM | OI/GAC400-EN REV. A

Storing the system

General storage information
Store in a place protected from the weather. Observe the
designated storage temperatures and humidity. The transport
packing, if present, should not be removed during storage. In the
event that the probe gas sampling system is temporarily shut
down, ensure suitable wrapping.
Storing the various modules
Observe the following instructions with regard to storing the
various modules:
Module Storage conditions
Retractor including probe • During storage, support the tip of the
assembled gas sampling probe. It is possible to
use the probe support that was originally sent
with the system upon purchase (if still available).
• Only store after draining all water out of the
internal tubes.
Cooling module and water Only store after draining all water out of the internal
tank tubes and draining of the tank.
Control Cabinet Store on rear side lying on pallet
Compressed-air tank • Ensure adequate protection of the attachments.
(optional) • Only store after draining all water out of the
internal tubes.
Environmental conditions
Observe the following physical limits with regards to storing the
various modules:
Module Environmental conditions for storage
Retractor including Ambient temperature: +5 °C to +55 °C; after
probe completely draining all water and drying parts in
contact with cooling water or condensation: -20 °C to
+55 °C
Air humidity: Year-round average max. 75 %, short-
term max. 95 %, occasional slight condensation is
permitted
Ambient temperature: +5 °C to +55 °C; after
Cooling module and
water tank completely draining all water and drying parts in
contact with cooling water or condensation: -20 °C to
+55 °C
Air humidity: Year-round average max. 75 %, short-
term max. 95 %, occasional slight condensation is
permitted
Control cabinet Ambient temperature: -20 °C to +55 °C
Air humidity: Year-round average max. 75 %, short-
term max. 95 %, occasional slight condensation is
permitted
Ambient temperature: +5 °C to +55 °C; after
Compressed-air tank
(optional) completely draining all water and drying parts in
contact with cooling water or condensation: -20 °C to
+55 °C
Air humidity: Year-round average max. 75 %, short-
term max. 95 %, occasional slight condensation is
permitted
39