ABB ProKiln GAC400 Operating Instruction page 79

ProKiln GAC400 PROBE GAS SAMPLING SYSTEM | OI/GAC400-EN REV. A
9. Unlock EMERGENCY STOP switch -15S7 or -150S3 by turning
the back ring in the direction of the arrow. No movement
must be seen.
10. Push the blue button Emergency Reset -15SB/-15P12 to allow
new operation of the probe retractor and air blaster probe
blow-back.
11. Insert gas sampling probe into the kiln.
Path: Main ► Probe Position ► Go S3
WARNING! Gas sampling probe moves into the kiln. Do not
stand in the area of travel of the gas sampling probe or
probe buggy until the probe is completely inserted into the
kiln and the warning lamps/sounds go out.
12. Switch system to Auto mode on the HMI
Path: Home ► Auto
13. Operation/Service Mode -50S15 switch must be switch back
to Operation Mode
79