ABB ProKiln GAC400 Operating Instruction page 43

ProKiln GAC400 PROBE GAS SAMPLING SYSTEM | OI/GAC400-EN REV. A
8. Remove retractor buggy lock (, Pos.
transportation support (, Pos.
Note
Do not throw away the probe transportation support, as it can
be used as a tool in case the probe needs to be removed from
the buggy for maintenance activities.
1
1 Retractor buggy lock
Figure 37: Retractor buggy lock and probe transportation support
1) and probe
2).
2
2 Probe transportation support
Adjustment of the retractor
After completing all installation tasks and start-up, it may be
necessary to change the position of the probe to ensure precise
penetration and retraction inside the rotary kiln.
43