ABB ProKiln GAC400 Operating Instruction page 27

ProKiln GAC400 PROBE GAS SAMPLING SYSTEM | OI/GAC400-EN REV. A
Operational handles of the control cabinet
Figure 13: Operational handles of the control cabinet
Pos. Component
1 M1 motor
2 M1 motor brake
3 Water system power supply
4 H1 Probe heater
5 H2 Sample hose heater
6 H3 Heated sample shut-off
valve (optional)
7 Power outlet
8 Power supply 24VDC
9 Emergency stop
10 UPS Main switch
11 Main Switch
12 Emergency reset
13 Operation/Service mode
9
j
k
l
m
Function
Retractor drive
Retractor position brake
Power distribution to water system
Probe sample tube heater
Sample hose heater in retractor
Heater for heated shut-off valve (optional)
Control cabinet internal power outlet
Control power supply
Stops all movements and air blaster blow-
back of probe
Master turn-off UPS for system
Master turn-off general power supply for
system
Reset button after the Emergency Stop
has been pushed
Switch between normal operation and
service mode
Alarm/status lights and sound tower
Figure 14: Alarm/status lights and sound tower
Indication Function
Green Flashing light
Green Constant light
Yellow Flashing light
Yellow Constant light
Red Constant light
White Flashing light
Sound On and off
Retractor system control cabinet
The retractor has its own control cabinet with various
components. The cabinet is permanently fixed to the back of the
retractor and contains an electrical section (left side) as well as a
pneumatical section (right side). A light and sound tower is also
affixed to this cabinet, which replicates the indications of the
light and sound tower of the control cabinet. Manual operation
and movements of the probe can be done from this cabinet
while the system is in manual mode.
2
Figure 15: Operational handles of the retractor cabinet
Meaning
Retractor is locked in safe position
Status of probe gas sampling system
in Automatic operation
Status service mode
Maintenance request
System alarm and probe retracted
from kiln
Warning - Probe and retractor is or will
be moving
Warning - Probe and retractor is or will
be moving
1
3
4
27