Setting The Rpm; Setting The Time; Setting The Temperature - Hanil HyperVAC HVC-2124 User Manual

4. Operation

4.2 Setting the RPM

1. Press the
- RPM mode
- RPM LED flickers on the display window.
2. Press the or
to complete the setting.
▶ Speed setting unit (display unit): 10 rpm (1 rpm)
▶ Speed setting range: (200 ~ 2,000 rpm)

4.3 Setting the Time

1. Press the button once.
- The set time LED flickers with beeping sound.
2. Press the or
to complete the setting.
- Time is counted down after starting centrifugation.
▶ Time setting range: 23 hr 59 min or continuous

4.4 Setting the Temperature

1. Press the button once.
2. Press the or
to complete the setting.
▶ Temp setting unit & display unit: 1 °C
▶ Temp setting range: 4 ~�5 ℃
▶ If you want to turn off the temperature setting, press the
Temperature Pull-up time(2000rpm, Vacuum on, RT)
-RT->30°C : 20min
-RT->45°C : 60min
-RT->65°C : 90min
★ While pull-up time, the temperature can be displayed higher than the actual internal
temperature of chamber
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
button once.
button to change input value and then press the
button to change input value and then press the
button to change input value and then press the
button to until OFF appears
button
button
button
17/29