Setting Rpm/Rcf -13; Setting Run Time -13 - Hanil Fleta 5 Operating Manual

4. Operation
4.5 Setting RPM/RCF
① Press the Mode (
②Press the Enter (
▶ Press the Enter button once more to set RCF.
- RPM mode: RPM flickering
- RCFmode: RCF flickering
③ Turn the Enter (
④ Press the Enter (
⑤ Do you save? [Yes] [No]
▶ Turn Mode button to select Yes or No
⑥ Press the Enter (
4.6 Setting run time
① Press the Enter (
② Turn the Mode (
③ Turn the Enter (
④ Press the Enter (
) button in stand-by mode.
) button to set RPM.
) button to the left or right to input the value.
) button to save the value.
) button to finish setting.
) button in stand-by mode.
) button to move the cursor to 'Time'.
) button to the left or right to input the value.
) button to finish setting.
info@ihanil.com / techsupport@ihanil.com l 13