Switching On The Device; Opening The Lid - Hanil HyperVAC HVC-2124 User Manual

3. Installation

3.3 Switching On the Device

1. After connecting the AC Power cord to the mains power on the right back of the device,
turn on the Earth Leakage Circuit Breaker.
▶ Check the power on.
2. Turn on the main power on the right side of the device.

3.4 Opening the Lid

1. For opening lid, press the
- Should press the
- Close the lid until hearing clank shut.
- When the lid is open, the lid LED turns on.
- The lid is not released while the device is running.
(With the vacuum pump connected, the lid is released only when the vacuum
is released.)
- If the lid is opened, the device cannot be operated even with pressing the
- Power Failure: If there is any power failure during operation, lid is not open
with
completely
stopped and the power is on. If you want to release the lid in the event of a
power failure, refer to '3-5. Emergency Lid Release.
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
button.
button when the lid is closed (Lid LED turns off).
button.
the button. Lid can be released only when the operation is
11/29