Page 1
Operating Manual Ultra 5.0 Ultra Centrifuge Date of Purchase Serial No. Place of purchase...
Page 2
Copyright 2017 Hanil Scientific Inc. All rights reserved. Contact Us If you have and questions, contact Hanil Scientific Inc. or place of purchase. sales@ihanil.com / techsupport@ihanil.com...
CONTENTS General Considerations------------------------------------------------- Safety Transport & Storage Safety label Electric safety information Product description------------------------------------------------------- Structure -5 Delivery package -5 2.3 Technical specifications -6 Installation ---------------------------------------------------------------- Packing Inspection Installation -7 3.2.1 Selecting the location -7 3.2.2 Power connetion -8 Operation ---------------------------------------------------------------- Operation panel 4.2 Opening and closing the lid -10 4.3 Loading and removal of the rotor -10...
2. Check the voltage to be used, before connecting the centrifuge to the power source. 3. Only use rotors, parts, and accessories provided by Hanil Scientific Inc. Hanil Scientific Inc. is not responsible for damages of the device and accidents caused by using parts and accessories not recommended.
1. General Considerations 1.2 Transport & Storage • Only lift and transport the • The device and the accessories device with sufficient number of may only be stored in dry rooms helpers. -Storage- -Transport- Ambient temperature 5℃~35℃ Ambient temperature -10℃~40℃ Maximum relative humidity 30%~85% Maximum relative humidity 10%~90% Air pressure 500~1060hpa...
④ Power switch : On/off the centrifuge ⑤ RPM measuring window: Visual inspection for rotor stop or for a speed check using a tachometer. 2.2 Delivery package ① Ultra 5.0 Mainbody ② Power Cable ③ Operating manual ④ Optional items: Rotors...
3. Installation 3.1 Packing Inspection •Check packing conditions carefully, before unpacking. •Contact Hanil Scientific Inc. immediately if damages found. •Check the delivery for completeness. •You can get contact details on packing boxes and the back of the manual. 3.2 Installation 3.2.1 Selecting the location...
3. Installation 3.1 Packing Inspection 3.2.2 Power Connection • Connect the device to voltage sources which correspond to the electrical requirements on the label attached to the device. • Use sockets with a protective earth conductor and provided powercord. 1. Connect the power cable to the power socket on the right side of the product and plug the cord into the outlet.
4. Operation 4.1 Operation Panel Button Function Set RPM Set RCF Time Set centrifugation time Set the temperature: -10℃to 40 ℃ TEMP TEMP LIMIT Keep the temperature when centrifugation with sensitive samples ROTOR Rotor information can be confirmed. CALL Calling up a program SAVE Save a program VIEW...
•Closing the lid Put the lid on and press the edge of the lid. 4.3 Loading and removal of the rotor •Only use rotors, parts, and accessories provided by Hanil Scientific Inc. •Do not use scatched or cracked rotor in use. Loading ①...
4. Operation 4.4 Loading tubes • Only use tubes provided or approved by Hanil Scientific Inc. • Always use the same type of tube. • Tubes should be loaded symmetrically. • Do not exceed the maximum rated speed of the tube.
4. Operation 4.5 Setting RPM/RCF ① Press the RPM ( ) button or RCF ( ) button. ② Press the numeric key to set desired RPM/RCF. ③ Press the Enter ( ) button to fix the value. 4.6 Setting run time ①...
4. Operation 4.9 Pulse function • After reaching the setting rpm, it decelerates and stops. ① Set the centrifugation speed. (see 4.5) ② Press the Pulse ( ) button. 4.10 Saving / Recall programs Saving a program ① Set the centrifugation time/speed/Accel/Decel values. ②...
5. Maintenance 5.1 Care instructions • The following procedures should be performed regulary. ①Regularly inspect the rotor chamber for check the motor shaft is nomal. ②Rotate the shaft with your hand to make sure it turns smoothly ③Use the stopwatch to check that the time setting is correct 5.2 Cleaning •...
6. Troubleshooting 6.1 General errors Problem Recommended Action Check the power cord connection. Power failure Check the power fuse of the device. Device cannot be started Check the lid is closed completely. Lid cannot be opened Press the ‘Lid open button’. Remove the dirt at the door latch and Lid cannot be closed close the lid.