Setting Rpm/Rcf -12; Setting Run Time -12 - Hanil Cellspin II User Manual

4. Operation
4.5 Setting RPM/RCF
[Setting RPM]
1. Press a [RPM/RCF] button once.
RPM MODE is on by pressing the [RPM/RCF] button once.
2. Press the [▲▼] buttons to change the set value.
Speed setting unit: 10 rpm
3. Press the [RPM/RCF] button again to set the value.
[Setting RCF]
1. Press a [RPM/RCF] button twice.
RCF MODE is on by pressing the [RPM/RCF] button twice.
2. Press the [▲▼] buttons to change input value
3. Press the [RPM/RCF] button again for saving.
4.6 Setting run time
[Setting the MIN Value]
1. Press the [TIME] button once.
The MIN mode is on by pressing the [TIME] button once.
2. Press the [▲▼] buttons to change the set value.
3. Press the [TIME] button again to set the value.
[Setting the SEC value]
1. Press the [TIME] button twice.
The SEC mode is on by pressing the [TIME] button twice.
2. Press the [▲▼] buttons to change the set value.
3. Press the [TIME] button again to set the value.
sales@ihanil.com / techsupport@ihanil.com l 12