4. Operation
4.1 Key Functions of Control Panel
[Sub Display]
Sub Display appears upon the
- Sub Display function is for manual ON/OFF of vacuum pump. But it can be used only
when the machine is not operating.
- Normally, adjustment of the Sub Display is not used for operation but for Emergency Lid
Release in any emergency conditions. The detailed method & sequence for the Emergency
Lid Release are stated in section 6-7-3.
- If you press the
Display again.
- Function LED blinks during the Sub Display setting and is kept on when the setting is
completed.
16/29
www.ihanil.com
button after setting the operating conditions.
button after setting the Sub Display function, you can go to the Main