Setting Rpm/Rcf -11; Setting Run Time -11; Setting Accelation/Deceleration Rate -11; Start The Centrifugation Run -11 - Hanil Component R6 Operating Manual

4. Operation
4.4 Setting RPM/RCF
① Press the RPM (
② Press the numeric key to set required RPM/RCF.
③ Press the Enter (
4.5 Setting run time
① Press the Time (
② Press the numeric key to set centrifugation time.(<100hr)
③ Press the Enter (
4.6 Setting Accelation/Deceleration rate
① Press the Accel (
② Press the Numeric keys to select the Acc/Dec step.(0~9 steps)
▶The higher the setting step, the faster the accelation or deceleration speed.
▶Decel step'0'means natural brake.
③ Press the Enter (
4.7 Start the centrifugation run
① Check the all parameters are correct and the lid is closed.
② Press Start (
4.8 End the centrifugation
① Press Stop (
11 l www.ihanil.com
) button or RCF (
) button to fix the value.
) button.
) button to fix the value.
) key or 'Decel (
) button to fix the value.
) button.
) key to stop centrifugation.
) button.
)key.