Saving A Program; Calling Up A Program - Hanil HyperVAC HVC-2124 User Manual

4. Operation

4.5 Saving a Program

1. Set parameters. (Refer to 4-2 ~ 4-4.)
2. Press the
- Check the message of "PROGRAM SAVE: ##" on the display window.
3. Press the or
- Save up to 100 programs. (Program numbers from 0 to 99)
4. Press the button to complete the saving.

4.6 Calling up a Program

1. To recall the saved program, press the
- Check the message of "PROGRAM CALL: ##" on the display window.
3. Press the or
and then press the
4.7 Start / Stop
[Start]
1. After setting RPM, Time and Temp., press the
- During running, a 'Start LED' is turned on.
- The device runs only when the lid is closed.
[Stop]
1. You can stop the operation by pressing the
18/29 www.ihanil.com
button longer than 3 seconds.
buttons to change input Program number.
buttons to to select program number you want to call up
button.
button shortly (less than 1 sec.).
button.
button.