Table of Contents
Advertisement
5. Maintenance
5.1 Outer Part of Device
1. Clean the outside of the device with dry soft cloth. If necessary, dip the cloth in neutral
detergent and clean contaminated area. Keep the device completely dry after cleaning.
2. Do not use any volatile chemicals such as alcohol and benzene, etc.
3. Be careful not to make scratches on the surface of the device. The scratches can cause
corrosion on the surface of the device.
▶ If any rust is found on the vacuum pump, clean it with neutral detergents and keep it dry.
5.2 Chamber
1. Keep the chamber clean and dry after every use.
2. If the chamber is contaminated, dip the cloth in neutral detergent and clean contaminated
area.
5.3 Motor Shaft
1. Always keep the motor shaft clean to prevent from any imbalance problem caused by
contaminants.
2. After using the device, take out the rotor from the shaft and clean the shaft with dry
soft cloth to keep dry.
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
21/29
Advertisement
Table of Contents
