Hanil HyperVAC HVC-2124 User Manual page 20

4. Operation
4.8 Operation Sequence
[Operating Status for Each Part (VacPump / Release / Heater)]
Power ON
(Start status: default setting)
Setting Temperature and Running
Device (~20 min.)
Until reaching the set RPM (Refer to
After reaching the set RPM or 1,000 rpm
Press the STOP button.
After completing the Stop –Return to the
Start Status (default setting)
4.9 Manaul Operation
If you need to adjust the function of vacuum pump, to release it or execute emergency open,
you can use manual operation.
1. Turn on the main power.
2. Press the button.
3. Check the display. (Default: Vacuum pump: OFF / Release: OFF)
4. Press the button and then press the
the vacuum pump. You can switch on or off vacuum pump and release the vacuum on your
need. You need to press the
5. If you want to execute the emergency lid open, the release has to be set as 'ON'.
6. When the vacuum release is completed, alarm beeps and Lid LED blinks for 5 seconds.
7. Press the button and open the lid within 5 seconds while the Lid LED blinks.
20/29 www.ihanil.com
VacPump
OFF
VacPump
OFF
VacPump
OFF
VacPump
ON
VacPump
OFF
VacPump
OFF
or
button after setting each function.
Release
OFF
Release
OFF
Release
OFF
Release
OFF
Release
ON
Release
OFF
buttons to set the status of
Heater
OFF
Heater
OFF
Heater
ON
Heater
ON
Heater
OFF
Heater
OFF