Installing/Removing The Rotor - Hanil HyperVAC HVC-2124 User Manual

3. Installation

3.6 Installing/Removing the Rotor

1. Before installing a rotor, clean the motor shaft and chamber with soft dry towel.
2. Load a rotor into the motor shaft. Lock it with the Locking Nut.
- To install the rotor: Rotate the locking nut clockwise until tightly assembled.
- To remove the rotor: Rotate the locking nut counterclockwise.
Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
Locking nut
13/29