Table of Contents
Advertisement
3. Installation
3.1 Unpacking
1. Open the box and lift out the device carefully.
2. The system should be horizontally lifted up on the flat table.
3. Insert the Emergency Lid Release Tool into 'Opening for Emergency Lid Release' on the left
side of the main body.
▶ Remove the protection material inside the main body; Vacuum Concentrator series are
delivered with the basic rotor mounted, and the protection material is inside the main body
for rotor protection.
4. It is now ready for installation.
3.2 Connection with Supplying Device
The following pictures guide a way for connecting a Drip catcher kit with Centrifuge and
Vacuum Pump.
10/29
www.ihanil.com
Connection to
Vacuum Pump
Right Connection
Way of Pipe
Connection to
Centrifuge
Advertisement
Table of Contents
