Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hanil ARA Smart 6
Summary of Contents for Hanil ARA Smart 6
- Page 1 ARA Smart 6...
- Page 2 ARA Smart 6 Research Use Only Copyrightⓒ 2019 Hanil Scientific Inc. All rights reserved. Contact Us If you have any questions, contact Hanil Scientific Inc. techsupport@ihanil.com / info@ihanil.com...
-
Page 3: Table Of Contents
CONTENTS 1. Safety ----------------------- 4 1-1. Caution: Installation----- 4 1-2. Caution: Use ------------- 5 2. Intended Use ------------------ 5 3. Product overview --------------- 6 4. Technical specifications ------- 7 5. Installaion/Operation --------- 8 5-1. Power connection ------ 8 5-2. Operation -------------- 9 6. -
Page 4: Safety
USER MANUAL MINI CENTRIFUGE 1. Safety Follow precautions and all the safety requirements described on this user manual to prevent any damages and failure of equipment. 1-1. Caution: Installation 1. The device must be kept in a dry and well-ventilated room. 2. -
Page 5: Caution: Use
6. Do not attempt to slow or stop the spinning rotor by hand. 7. Do not spill liquid on the device. If you spill liquid, shut off the power supply and unplug the powercord from the outlet and contact Hanil Technical Support Team. 8. Do not block vents. -
Page 6: Product Overview
USER MANUAL MINI CENTRIFUGE 3. Product overview Closing the lid: Start the centrifugation Opening the lid: Stop the centrifugation DC adaptor Connector Lid open button Continuous & Normal Switch Operation mode switch Short Mode (S) Operate after closing the lid Continuous Mode(C) Stop the centrifugation after 15 min. -
Page 7: Technical Specifications
MINI CENTRIFUGE * Delivery package Angle Rotor Rotor Main body Rotor Cap Nut (1.5/2.0 mL x 6-hole) (2-PCR Strips) USER MANUAL ARA SmarT 6 Wrench AC/DC adaptor Manual (For rotor locking) 4. Technical Specifications Max. RPM 6,500 RPM Max. RCF... -
Page 8: Installaion/Operation
USER MANUAL MINI CENTRIFUGE 5. Installtion / Operation Check the delivery for completeness. The device should be installed on flat surface to maintain level. Do not bend or pull the AC/DC adaptor. Keep this manual near the device at all times. 5-1. -
Page 9: Operation
USER MANUAL MINI CENTRIFUGE 5-2. Operation 1. Installing the rotor - Load the rotor vertically onto the motor shaft. - Put the cap nut on the center of the rotor and turn the wrench clockwise untill it secured. 2. Starting/Stopping the centrifugation Short Mode (S) - When the lid is closed, centrifutaion starts. -
Page 10: Troubleshooting
→ Check the output DC volt of the adapter using a multimeter 3. Lid sensor failure → Contact Hanil Technical Support Team. 4. If the beep does not sound right after connecting the power supply, contact Hanil Technical Support Team. - Page 12 OMM7PDEN1901-C im-ara.com...