4. Operation
4.6 Setting RPM
1. Press the Enter knob.
2. Turn the Mode knob to select RPM setting mode.
▶ RPM setting mode: RPM flashes.
3. Turn the Enter knob until the desired rpm is displayed.
4. Press the Enter knob to save the value.
5. Do you save? appears.
Turn the Mode knob to select [Yes]
6. Press the Enter knob.
4.7 Setting RCF
1. Press the Mode knob in stand-by mode.
2. Press the Enter knob.
3. Turn the Mode knob to select RCF setting mode.
▶ RCF setting mode: xg flashes.
4. Turn the Enter knob until the desired RCF is displayed.
5. Press the Enter knob to save the value.
6. Do you save? appears.
Turn the Mode knob to select [Yes]
7. Press the Enter knob.
14
www.ihanil.com