5.5. RF Connector Recommendation
If RF connector is used for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by Hirose.
U.FL-LP series mated plugs listed in the following figure can be used to match the U.FL-R-SMT
connector.
SG865W_Series_Hardware_Design
⚫
Input impedance: 50 Ω
⚫
Polarization type: Vertical
⚫
Cable insertion loss: < 1 dB
Figure 33: Dimensions of the Receptacle (Unit: mm)
Smart Module Series
99 / 114