Rf Connector Recommendation - Quectel SC262R Series Hardware Design

GNSS

6.5.2. RF Connector Recommendation

If you use an RF connector for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
SC262R_Series_Hardware_Design
Frequency range: 1559–1609 MHz
Polarization: RHCP or linear
VSWR: < 2 (Typ.)
For passive antenna usage:
Passive Antenna Gain: > 0 dBi
For active antenna usage:
Passive Antenna Gain: > 0 dBi
Active Antenna Gain: > -2 dBi
Active Antenna Noise Figure: < 1.5 dB (Typ.)
Active Antenna Embedded LNA Gain: < 17 dB (Typ.)
Figure 38: Dimensions of the Receptacle (Unit: mm)
Smart Module Series
86 / 115