How To Adjust Projector; How To Change Software; Available Blanking Plates - Bay-Tek CONNECT 4 HOOPS Service Manual

HOW TO ADJUST PROJECTOR

There is a slot
Projector
under projector
Image
that contains
Fuzzy
2 slide levers
Remote Control for the Projector
There are options in the projector menu that can be accessed by the
remote control.
Please stand back 10 feet with the remote control so the projector "sees" it.
Casio XJ-V110W Projector
Image Adjustment
Brightness
Contrast
Color Mode
Color Balance
Volume Adjustments
Volume
Screen Settings
Keystone Correction 39
Aspect Ratio
Projection Mode
Ceiling Mount
No Signal Screen
Blank Screen

HOW TO CHANGE SOFTWARE

New Software Installation:
The hard drive contains all the information about the game: Credits per play, ticket pattern,
etc. Be sure to check this information after finishing installing new software.
Turn off game by flipping the power switch on the power strip.
Press tab on far side of hard drive
and gentle remove from motherboard.
Unplug power supply jumper connector
and remove old hard drive from unit.
Install new hard drive by gently pushing straight onto motherboard until it "clicks".
Turn the game back on by flipping the power switch on the power strip.
Note: The I/O boards will automatically be updated by the motherboard software.
0
0
Standard
Normal
15
Normal
Front
On
Blue
Black
Locate hard drive on motherboard.
One slide lever is for zoom.
One slide lever is for focus.
Reach up under projector and adjust these 2 knobs to clear
up image on screen.
Input Settings
Signal Name Indicator On
Option Settings 1
Auto Keystone Correction On
Auto Power Off
Direct Power ON
Language
Option Settings 2
High Altitude
47
10 Min
On
English
Off
AAMB11-HD
Motherboard
AAMB10-HD
Motherboard