Bay-Tek CONNECT 4 HOOPS Service Manual page 16

CONNECT 4 HOOPS GAME SETUP
Using 3 people - the side boards can now be installed on the top of the cabinet.
We recommend 2 people inside the cabinet to hold each side and
one person on a ladder outside the cabinet to insert the bolts.
Bring the left side board up into position and set on top white plastic
on back left pole.
Line up holes in side board with back left pole.
Hand thread 2 of 3/8-16 X 1 1/2" bolt with 3/8" washers to get
both started.
Go to the front left pole and
align the holes in the wood to the metal pole.
Hand thread 2 of 3/8-16 X 1 1/2" bolt with 3/8" washers to get
both started.
Locate a A5ME10011 top side connector plate.
Install the plate with 8 of the black ¼-20 X 1 Phillips head
bolts using a # 3 Phillips Head bit.
All 4 of the bolts on the front poles can now be tighten using a 9/16"
wrench.
*** Repeat this process for the top right roof side. ***
A5SCHH010
A5SCHH010
A5BOPH312
A5WAFL050
A5WAFL050
16