Bay-Tek CONNECT 4 HOOPS Service Manual page 13

CONNECT 4 HOOPS GAME SETUP
Using 4 people - raise the
and position on top of the top marquee.
Slide the top marquee into the front poles.
The front console will be at an angle as shown.
The 2 front poles will slide into the white
plastic mounting guides.
Secure top marquee to the front poles using
4 of 3/8-16 X 4 bolts - reach inside plexi
side to tighten with 3/8" washers and 3/8-16
nylon nuts using a 9/16" wrench.
A5BOHH096
Game will now
look like this.
On the right side of marquee - connect the AC power cord and
white connectors. Feed excess cable length into the marquee
itself.
On the left side of marquee - connect the blue colored
connectors together, and plug the brown colored connectors
together. Feed excess cable length into the marquee itself.
This one connector and coiled wire will be left unplugged for
now.
Secure the left and right plexi to the top marquee
with 8 of 4 X 1/2"small black screws using a #1
Phillips screwdriver.
front
poles of the front console
A5NUNY070
A5WALO010
13
A5SCPH030
A5NUNY070