Bay-Tek CONNECT 4 HOOPS Service Manual page 15

CONNECT 4 HOOPS GAME SETUP
Locate the 4 roof side boards.
Match the left back board to the left front
board - There will be an "L" carved into the
back of the wood to be used.
Locate a A5ME10011 top side connector plate.
Install the plate with 8 of the black ¼-20 X 1 Phillips head
bolts using a # 3 Phillips Head bit.
A5BOPH312
*** Repeat this process for the top right roof side. ***
Locate both A5ME10013 long roof metal side rails.
Flip the assembled roof side upside-down so that the decal is
facing down. Place metal rail on long straight edge of the
wood and match up pilot holes with the metal bracket.
Ensure the "L" is positioned to the inside of the wood as
shown.
Install the rail with 11 of the black 10 X 5/8" screws using a
# 2 Square Head bit.
*** Repeat this process for the top right roof side. ***
A5SCPH150
15