Bay-Tek CONNECT 4 HOOPS Service Manual page 14

CONNECT 4 HOOPS GAME SETUP
Warning!
At this time, the front console with top marquee is ready to be stood upright.
The assembly will be unstable until attached to the rear sections.
It is very important to have 4 people ready to hold in position until it is secured!
Lift the marquee and stand the front console upright and position
close to the rest of game to connect cables before sliding into
final position.
On the left side - connect the 4 connectors: USB cables, green, and gold
connectors.
On the right side - connect the white colored connectors.
Locate the 2 remaining A5ME10010 bottom side connector plates.
Install the plates on both sides of the cabinet with the black
¼-20 X 1 Phillips head bolts using a # 3 Phillips Head bit.
(10 per side)
Note: If the holes do not line up - adjust the leg leveler feet on the cabinet.
A5BOPH312
14