Bay-Tek CONNECT 4 HOOPS Service Manual page 12

CONNECT 4 HOOPS GAME SETUP
Tilt the front console down and lay on it's face.
Place the top large marquee in position as shown:
Position large marquee in front of game and hand
thread 2 of 1/4-20 X 1 1/2" bolts with 1/4" lock washers
into the 2 upper holes. Leave about 1/2" of bolt so that
the smaller marquee can be placed over the heads of
the bolts.
A5BOHH060
Place the smaller marquee in position
onto the 2 previously installed bolts in
the large marquee.
Hand thread the 2 remaining 1/4-20 X 1 1/2" bolts with 1/4"
lock washers into the 2 lower holes in the large marquee to get
started, then tighten all 4 bolts using a 7/16" wrench.
Plug in the 2 connectors, it does not matter which connector plugs into
which socket.
Place marquee on it's face and position close to the
poles coming from the front console.
A5WASI020
12
A5BOHH060
A5WASI020