Motherboard & Software Options - Bay-Tek Big Bass Wheel Service Manual

MOTHERBOARD / SOFTWARE OPTIONS
Big Bass Wheels may have 6 different types of motherboards. As motherboards become obsolete and can
not be purchased, different motherboards have had to be sourced to be backward compatible in most cases.
There are 2 paths of software that work in the different motherboards. If the wrong version is used, there will
be sound issues, or may not boot at all.
AAMB6
4 pin power connector needed. (Black, Black, Yellow, Yellow)
The long power in connector is either 20 pin or 24 pin.
There is a 4 pin breakaway that must be snapped off to fit into a
20 pin socket, or found in power supply harness and pushed
together to fit into the 24 pin socket.
Uses Software Version BBW1.56
AAMB7
4 pin power connector needed.
(Black, Black, Yellow, Yellow)
24 pin power in connector.
Uses Software Version BBW1.56
AAMB9
4 pin power connector not needed.
24 pin power in connector.
Uses Software Version BBW1.56
Currently using AAMB10E
4 pin power connector needed. (Black, Black, Yellow, Yellow)
24 pin power in connector.
Uses Software Version BBW1.62
AAMB8
4 pin power connector not needed.
24 pin power in connector.
Uses Software Version BBW1.56
AAMB10
4 pin power connector needed.
(Black, Black, Yellow, Yellow)
24 pin power in connector.
Uses Software Version BBW1.62
AAMB10E-FHDP/BBW
Motherboard
26
AAEX1007
AACE9730
or A5EX1006