Motherboard Communication Options - Bay-Tek Big Bass Wheel Service Manual

MOTHERBOARD COMMUNICATION OPTIONS

Production Change:
The communication cable from motherboard to I/O Aux Board needed to be changed with the use of the
MB10 & MB10E motherboards.
As a result, on 12/27/17 a change was made to a different communication cable.
Important! - the direction which this cable plugs into the motherboard is different between the 10 and 10E !
The motherboard will be damaged if this cable is plugged in incorrectly!
Current Production Version:
Part # AACE0024 - Communication originates on the Com1 connector on the motherboard to the I/O Aux Board.
AACB1900AMP
I/O Aux Board
Close up of
Older Versions:
Part # AACE1614 - Communication originates on the DB9 connector on the motherboard to the I/O Aux Board.
AACB1900AMP
I/O Aux Board
AACE0024
Comm from
I/O Board to
Motherboard
connector
Close up of
connector
AAMB10E-FHDP/BBW
Motherboard
AAMB10-FHD
Motherboard
AACE1614
Comm from
I/O Board to
Motherboard
Close up of
27
This motherboard
must be plugged in
this way!
This motherboard
must be plugged in
this way!
connector
AAMB9-FHD
Motherboard