How To Replace Handle; Puppy Video Wizard - Bay-Tek Big Bass Wheel Service Manual

If the monitor has been changed, or game looses monitor settings,
This screen will come up on power up.
The settings will have to be re-saved
1.) Plug a PS/2 keyboard into the keyboard port of the mother-
board. (purple colored port) or a USB keyboard into an empty USB
slot on the motherboard.
2.) Push "Enter" on the initial XORG screen.
3.) Make sure 1024x768x16 is selected.
Push "Enter" on the video resolution screen.
4.) The game software should now startup.
Play a few games, and these settings should be saved so that it will not come back.
5.) Turn game off, wait 2 minutes, turn game back on to verify it boots correctly.
6.) If this error returns, the USB software thumb drive is faulty and will have to be replaced.
Part# AAFHD005-BBW-1 or AAFHD005-BBW-2
HOW TO REMOVE THE HANDLE
The handle is designed to be removed from the game.
This will allow a technician to work on the solenoid assembly with a
reduced chance of accidental injury.
Tools needed:
1/2 inch socket
1/2 wrench
Locate the bolt, lock-washer, and a lock-nut under the speaker bracket.
Remove the nut and bolt to release the handle.

PUPPY VIDEO WIZARD

44