Programming Section; Programmable Options; Dipswitches - Bay-Tek Deep Freeze Owner's Manual

Programmable Options

Figure 3 Dipswitch location on Gen 5 Main Board

Dipswitches

S1
1 2 3 4 5 6 7 8
ON
IMPORTANT: Power must be OFF to the game when setting dipswitches. Turn OFF the power strip
inside the cabinet. Set the dipswitches to the desired settings, wait 30 seconds and then turn ON power
at the power strip.
Deep Freeze

PROGRAMMING SECTION

S2
1
S
GROUP S1
MAIN BOARD
The owner can easily set ticket value for each
target, playfield incline drop frequency, and
mercy tickets using the dipswitches on the main
circuit board. See default settings
following pages.
The main circuit board is located on the inside
center wall of the cabinet. Be sure power is off
before setting these dipswitches.
GROUP S2
1 2 3 4 5 6 7 8
ON
on the
S2
6